导航菜单
 
产品详情
Etalons
High precision technology
Strictly quality control
Innovation and Design by customer request

An etalon functions as a periodic, narrowband wavelength filter in which a light beam undergoes multiple reflections between two reflecting surfaces. It requires high quality, very flat optical surfaces and extreme parallelism to achieve high performance. They are widely used in telecommunications, lasers and spectroscopy to control and measure the wavelengths of light. Lasertec provides high quality air-spaced etalons, solid etalons.

Air-Spaced Etalons consist of two extremely parallel plates polished to very tight specification with an air gap between them. The inner surfaces of the plates are coated with partially reflecting coatings; the outer surfaces are coated with antireflection coatings. The spacer is a type of low expansion material such as ULE, fused silica or Zerodur which is optically contacted between the two plates to create an air gap. Air-spaced etalons are available in a wide range of FSR values from 1500 GHz to 10 GHz.

Plate Material

Fused Silica

Spacer Material

Fused Silica, ZerodurÆ, or ULE

Flatness

l/100

Parallelism

l/100

Gap

3m to 50mm

Clear Apertures

2mm to 100mm

Outside Diameter

Clear Aperture + 15%

Wavelengths

157nm to 3m

Finesse

Up to 100FSR

Coatings

Standard and Custom

Housing

Acetal or Aluminum

    Solid Etalons are made from a single plate with partially reflecting coatings on both sides. The two surfaces have excellent parallelism and flatness. The cavity is formed by the plate thickness. Solid etalons are available in a wide range of FSR values from 1500 GHz to 10 GHz.

Material

Fused Silica

Flatness

l/100

Parallelism

l/100

Clear Aperture

2mm to 125mm

Diameters

3mm to 150mm

Thickness

50m to 20mm

Wavelengths

157nm to 3m

Finesse

Up to 50FSR

Coatings

Standard and Custom

Housing

Acetal or Aluminum

 

Etalon can be tuned over a limited range to shift their peak wavelength. Here are the three techniques.

1. Angular tuning: As the incident angle increases, the phase shift per traversal changes and the center wavelength can be tuned down.

2. Temperature tuning: This technique is primarily for solid etalons. The temperature-tuning changes both the cavity thickness and the refractive index, which shift the center wavelength. One example is solid silicon etalons. They are often used as tunable dispersion compensators.  

脚注信息